Feature, Journal
Comment 1

Experiment 2: Kodak Portra 160 vs. Portra 400 vs. Portra 800

This article is going to compare Kodak films Portra 160, Portra 400, and Portra 800. For exposure testing data on Portra 400, Portra 400 shot and developed at 800, Portra 800, and 8 other film stocks, please refer to this article. For an additional reference of Portra 400 shot and developed at 800, please refer to this article.

To ensure consistency throughout the experiment, all of the shots were taken using the exact same camera/lens combo. To accomplish this, 3 different film backs were used, each loaded with a different Kodak Portra film. The control conditions were as follows:

  • Camera: Mamiya 645 Pro TL
  • Lenses: 80mm f/2.8 N, 150mm f/3.5 N, 300mm f/5.6 N-ULD
  • Lighting (Portrait Only): 2 Profoto B1X with diffusers
  • Light Meter: LUMU Light Meter iPhone app

All films were developed at a local lab here in Columbus, OH and scanned at home using an Epson v600. All provided images were the converted negatives straight from the scanner software included with the v600.

Results

As perhaps could have been expected, I didn’t prefer one film over the rest in all contexts. Overall, I preferred Portra 800 over 160 and 400 in most situations with a strict exception to portraits.

All told, we took 3 different sets of portraits (though only posting one) and in all 3, Portra 800 was far too saturated. To a level that I, personally, looked jaundiced. I honestly expected Portra 160 to shine here but I honestly thought all of the scans turned out equally as pale. So much so that they looked a bit distasteful. I do expect that I could have remedied a good deal of that in settings in the scan or in PS after but again, all of the presented images are straight out of the scanner’s software.

Probably the only example series where I personally preferred Portra 160 over 800 and a little over Portra 400 was in the library. Portra 800 had a tendency to be too saturated in a situation when the color palette was fairly white. Similar to the portraits above, Portra 800 tends to turn whites yellow in a fairly unattractive way. Portra 400 was right in the middle but in a scene I would have preferred to remain bright and airy feeling, I preferred no yellow tint.

As for the other 3 samples, I did strongly prefer Portra 800. In the vines sample, I think 800 blew the other two out of the water. The colors are intense but in a way that accentuates the present colors without changing them into something undesirable. For the tower, all three returned a pretty distinct color palette – so much so that I went back and rescanned each with the expectation of getting more uniformity then but the scans came back virtually the same as the first pass – that all 3 are distinctly different. Finally, for the vertical tunnel at the OSU campus, I really think the saturation of Portra 800 shined. I loved the way those colors turned out.

Conclusion

I’m not sure that my opinion between the three is really going to change. I will continue to shoot more and more 800 in and around Ohio (or at least on trips where I’m not flying) and I will shoot Portra 400 as an old reliable.

Thanks

Special thanks to Matt Seal for being generous with letting us use his studio, Dr. H for being an uncomfortable model, and Nevin Johnson for his help with the scanning.

1 Comment

  1. Very interesting, I have shot a few rolls of Portra 160, and just the one roll of Portra 800 which I pushed one stop – was very happy with the results!

    Like

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s